Copyright 2004 by M. Uli Kusterer Fri, 29 Nov -1901 11:00:00 GMT Comments on article blog-ibook-disassembly at Zathras.de http://www.zathras.de/angelweb/blog-ibook-disassembly.htm blog-ibook-disassembly Comments witness_dot_of_dot_teachtext_at_gmx_dot_net (M. Uli Kusterer) witness_dot_of_dot_teachtext_at_gmx_dot_net (M. Uli Kusterer) en-us Comment 131 by steve http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment131 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment131 Seriously... You rock big for posting this! A MOST excellent job you did!
Comment 130 by Christopher harrison http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment130 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment130 Uli fantastic job
Thanks again for a formidable project to help us all beautifuly done much better than apple services
thanks Chris
Comment 129 by Juned Mansuri http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment129 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment129 Excellent article...Thanks
Comment 128 by Ed http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment128 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment128 I just changed the HD on a newly acquired G3 ibook. Actually, I just changed the G3 ibook on my old disk. The evil graphic chip problem had surfaced 2 years ago. I had old music recording hardware/software which I wanted to continue using with my old ibook, retiring it to that one specific job. So I got an old ibook and transplanted the HD. I remembered this article from 2 years ago, and tried googling "taking apart ibook" and this article came up as No. 1!! After all these years, it's a classic! Anyway, what I did was take pictures of each surface before taking the screws off, printed the picture and taped the screws to it.

If you want, I can upload the pictures so anyone wanting to do the operation can print them out and use them. Just let me know. Didn't have a stuffed moose available though, sorry.

Comment 127 by Tinker http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment127 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment127 This article was just what I needed. Saved me a bunch of time. Thanks you so much.
Comment 126 by headsign http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment126 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment126 PPS: C4 logo, of course ;)
Comment 125 by headsign http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment125 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment125 Thanks! Great tutorial!

P.S. Hey! Rentsch! Isn't it a small world? :)

Mat (the guy from Germany who made the C3 logo)
Comment 124 by Sara http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment124 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment124 Hi! Great write up! Thanks for documenting and sharing. Do you know if the screw sizes are the same for a iBook? Per chance? Lots of garbage on the 'net these days hard to find great sites like yours chock full of INFO. :D

I replaced my screen once and it was oddly gratifying. I love macs! Especially old ones. Mine is about as sturdy as fisher price toy. :D
Comment 123 by General Disquiet http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment123 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment123 Well, the instructions are brilliant - as far as they go. I wanted to change the combi drive on my G3. All went well until I got to the last bit of separating the aluminium from from the upper casing. I could release it on 3 sides, but failed to get it to release from around the screen hinges - it felt as if there were more screws there, but I'd taken out all those referred to.

I had to give up at this point and reassemble everything - so frustrating.

Any suggestions would be welcomed!
Comment 122 by Stux http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment122 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment122 After all these years, still the best guide out there.

Just had to take apart two old iBooks to scavenge their HDs.

Sigh. The iBook G3 is the Mac which made refuse to ever change the HD in a Mac Laptop again.
Comment 121 by Ron http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment121 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment121 My wife was just given an ibook g3 12 inch, has a 20 gig hard drive Will be replacing it with a new one, any idea what I should get? Was thinking about Samsung Spinpoint M5 HM160HC. Also will be installing 10.3 instead of 10.2 that came with it. What do you think? Thanks for the above instructions & your reply.
Comment 120 by Jayson Lorenzen http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment120 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment120 Jayson Lorenzen writes:
Thanks for all the working putting this photo set and instructions up for us all. It was really easy to do this replacement with your post as a companion.
Comment 119 by Joff Mac http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment119 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment119 I have a broken plug on the power adapter for my brothers iBook, and i was thinking of hard wiring the power adapter into the laptop, is that possible?
Comment 118 by Matt Sawatzky http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment118 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment118 Matt Sawatzky writes:
Thanks for the guide. It was quite helpful. This is just another reason I'm not a fan of Macs. The new ones are fine for removing the HDD and RAM, but these old ones are brutal. This helped out.
Comment 117 by Uli Kusterer http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment117 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment117 Uli Kusterer writes:
Cathy, you have to be very careful with those screws. They're special in that you need a particular key to get them out. Apparently, there's two very similar ones (IIRC one was metric, the other imperial, or so). One of them seems to fit but doesn't. The other one actually does fit.

The almost-fitting one will lose traction and not really work, but look like it just so fits, so get the proper one and it should work. If you really forced it, and the screws are damaged too badly, you're in trouble.

In that case you'd have to get someone to saw a slit into the screw head so you can pull it using a regular screwdriver or drill away the screw head (which lets you open the case) and then pull the rest of the screw out using a pair of pliers. Both things should only be done by a professional. If you drill away too much, you might not be able to pull the screw at all.

Problem is getting the proper key. You'd have to go to a specialty store, probably, otherwise you'll just get the same key again.
Comment 116 by Cathy http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment116 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment116 Cathy writes:
Thanks for the detailed instructions. I'm getting ready to undertake this project. I've got a white iBook, G3 with what I'm being told has a bad logic board. I want to get the back cover off and insert a shim, as I've read on the Internet, may be a fix. If this doesn't work I want to remove the hard drive and place it in my older iBook, clamshell tagerine model.

My question is how to I get the upper left and right screws out? I'm using a hex key and think I may have stripped these in the process. They're the only two very little things keeping me from removing the bottom casing. If you can help, thanks!
Comment 115 by samuel Sanders http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment115 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment115 Hey thank you very much. What type of HArd drive is it.
Comment 114 by olh http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment114 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment114 Many thanks for this site.

My iBook 12" 600MHz (PowerBook4,1) has now a new hard drive, a Samsumg 160GB HM160HC.

Please note the firmware in target disk mode and also OSX 10.4 see only 137GB, while Linux can use the full capacity.
I used this site, the harddrive tutorial from ifixit.com and ibk_dusb.pdf from Apple.
It took me 3 hours, with breaks inbetween, to take the iBook apart, 1 hour to reassemble it again.
Comment 113 by Jerry http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment113 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment113 Thanks for the article, I have already torn my G3 iBook 500 apart and re-soldered the mouse plug on, it was broken free when I purchased it off Ebay on an AS IS auction for 49 bucks, this required a total dissassembly of the machine, even had to take the motherboard off the frame work so I could get at all eight legs. I will give Apple a kudo though the way they have it mounted allowed a nice resolder without problems that I have experienced with PC laptops the legs were simply tinned as well as tinning the mounting points, then hold the part in place and run the iron over the legs attaches everything as it was before the rip loose.

Wish I had thought of changeing the hard drive then but I wanted to make sure that the mouse worked right before I replaced the HD it has a working 10 gig filled with nice software but I have a 40 gig that I took out of my Compaq a few months ago and put in my old Lombard that I want to put in this unit so I can have lots more software and a few tunes installed on.

I also found an outfit on Ebay that sells keys for the keyboard, and this unit came with the delete key here but one peg broken. Cost a bit over 3 bucks for the key whilst the keyboard would have run over 15.

At any rate thanks much for the turorial I reviewed it just now and will use it when tackel the brain transplant next week.
Comment 112 by Mark Nelson http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment112 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment112 Found the discussions interesting. Have had occasional experiences with Macintoshes but was recently introduced to the iBook when my son had a problem display. I found a broken G3 for $50 and swapped the display with the G4. After opening display cover, remove only the 4 tiny "+" screws going into the side of the actual display. There is a multipin connector going into the back center of the display under the heavy foil. And another power plug coming from the corner of the display. If you don't take too much apart, it goes fairly quick.

Would be nice if the comments were timestamped.
Comment 111 by ferri http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment111 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment111 I have a iBook G4 and now I'm forget the login pass word and cant login. I'm try with Mac OS CD while system is restarting and holding down the C key but I cand reset the password. If possible Please help me and solve my big problem in these days. thanks so much farzkh@yahoo.com
Comment 110 by Jan http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment110 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment110
Comment 109 by Jonathan http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment109 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment109 Uli,
Thanks for the response. Actually, I am pretty sure there is no cd/dvd in the slot drive. Yeah, I did several PMU & PRAM resets. I tried holding the shift key down & also tried the command s combo to go into single logon mode. those two methods worked when I first was able to get some data transferred & then used the fsck command to check the drive. But now it just will not start up at all. maybe I lucked out by getting what I did off the ibook before it completely crashed. I just wish I knew whether it needed just the dc power inverter replaced, the hard drive died, or if the logic board crashed. I pulled as many logs (panic, system, console, etc.) off of the laptop & printed them as well when I had it in safe mode before. They just don't seem to make sense to me. Anyway, I appreciate your feedback. Thanks.
Comment 108 by Uli Kusterer http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment108 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment108 Uli Kusterer writes:
@Jonathan: I have no clue, but the way you say this, it sounds like your Tiger CD might be stuck in the drive, and the sound you're hearing was the drive spinning up the CD. I guess you already tried zapping the PRAM?
Comment 107 by Jonathan http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment107 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment107 I really love your detailed info & pictures. I have been having a sudden panic failure constantly w/ my ibook g4 & it's killing me. i've gone through all of the web sites & apple's ideas, but I don't know how to narrow it down. I was finally able to get it into safe mode & network it via cable to an old windows computer I put linux on. I was able to at least save most of my docs. but I really need my ibook. it's my baby. :-) I can't figure out whether its a dc power whatever, the hard drive or the board. I can't get it to boot at all now. no whistles, messages in a lot of languages, freezes or anything. everynow and then the fan will kick on when I'm trying to start it. it makes a sound that sounds like its coming from the combo drive slot. unfortunately, I have no idea where my mac tiger original dvd is. any help is greatly appreciated.
Comment 106 by Uli Kusterer http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment106 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment106 Uli Kusterer writes:
Did you try putting the old HD back in? Does that work? I wouldn't be surprised if the iBook made the assumption there was an HD and that causes the shutdown. Also, are you sure it's the right kind of hard drive and it is jumpered correctly? The Mac mini may be newer and support HDs that the iBook doesn't ... ? I'm only guessing here, though.
Comment 105 by NinjaVenom http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment105 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment105 I took the G3 ibook 12" apart and replaced hardrive from another article that was nearly as good as yours. I have done this operation at least 4 times with 4 successes. I just got my kick in the crotch when I booted up. The mac turns on, starts to boot off the cd and shows the apple logo. Then the laptop shuts off completely. I wonder what I did wrong? I replaced the original hardrive which was just slow, not dead. It starts to boot in osx, and turns off. So it is not the new hardrive. I even hooked it up externally to my Mac mini and it works fine by usb cable. For a final test, I removed internal hardrive completely. I tried to boot from DVD, get the apple when the boot kicks in and then BLAMO! Same thing, shuts down completely. It should still start up and see no hardrive. It seems that the machine shuts down when the dvd or the hardrive osx tries to check the hardware. I have taken apart 5 times now. I am feeling hopeless. I tried to reset the pram, and the power cord with power button trick. I have reseated the memory and only connected necessary components...still same issue. I have the Mac half apart, with the battery just sitting in there, etc. I am not putting this back together until it boots properly.
Comment 104 by Paul Laird http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment104 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment104 Just completed the replacement of a dying HD on a G4 933mhz. One tiny screw left and idea where it goes - the thought of opening it up again for this is too daunting. And I had thought cracking open an iPod to replace a cracked screen was bad enough... until now I had always believed Apple used the KISS approach (Keep It Simple, Stupid).
Anyway a big thanks - now we have a rejuvenated iBook.
Comment 103 by skinny greathair http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment103 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment103 awesome! this helped soo much, i know how to take apart an ibook and u helped me figure mine out so i could screw things up and wreck it. seriously though, the best!
Comment 102 by Rick http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment102 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment102 ThaaaaanK Yoooooou!
I just picked up 9 of these little babies with unknown problems so this will help me to disassemble the things to work on.
Best Regards
Rick
Comment 101 by Uli Kusterer http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment101 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment101 Uli Kusterer writes:
@Chazine: I don't remember offhand where the battery was, and I can't make it out on any of the pictures I have. But I'd expect the battery to be in a little plastic box on the main board (top side), so yes, you'll need to get at least that far, and you'll probably have to remove the shielding more than just carefully twisting it up to get at the HD.
Comment 100 by Chazine http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment100 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment100 You made a wonderfull job describing step by step the disassembling process for any ibook, originally intended for the change of the hard disk. But what concerning the tiny memory/time battery? It seems that my own is dead. Should I disassemble also the same way as for replacing the HD? Or is there a special trick? Many anticipated thks and Cheers.
Comment 99 by cico lichtgestalt http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment99 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment99 hello i followed this steps and changed my harddrive for a 160Gb one but after puting everything together my ibook just dont turns on it dont make any sound no video but the caps lock bottom lights up.
do you have any idea in how to fix this?
Comment 98 by joe http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment98 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment98 Hey guys, Im new to macs and just bought an Ibook for school work. It works great, plenty of speed, enough hard drive for me, wireless internet..but there is one problem. The previous owner droped it a few times...once on the charging cord while it was plugged into the computer. So the full weight of the computer pressed the cord in, and I think it cracked the part the cord plugs into.
The computer will only charge if you either flip it upside down and prop the chargeing cord up, or if you flip it so it sits vertically then plug the cord in with a pencil underneith. It only responds to a slight pressure at a slight angle. It will not charge if you press hard. I also got a new charger for it, and the computer did the same thing with both chargers. If you are very lucky, it will charge while sitting up right and on, but it makes the computer act funny. The computer detects the charger, so it changes the screen brightness to "charger power source" but it wont actually charge unless if you prop it at the exact angle and pressure. If you bump it, it stops charging till you get it right.

Any ideas on how to fix this?

Right now, it works fine if you dont mind proping it upto charge.
Comment 97 by Uli Kusterer http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment97 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment97 Uli Kusterer writes:
Sorry, haven't got a clue. Never had anything to do with an iBook's power supply.

There's small devices whith which you can test whether something has current, I guess you could use that to find out if the power supply itself is damaged, or the iBook, but that's all I can offer (or just attach it to a friend's iBook).

The plug on the power supply is custom, so I don't think you could cut it off and attach a new one easily if it's just a broken cable. And all the soldering points inside the iBook are really not serviceable unless you are an electronics professional. They're just too tiny, so I doubt you could replace the plug and outlet with non-custom ones.
Comment 96 by Jp http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment96 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment96 Hello Uli, I have the same issue as the fellow named kajgod. i was wondering if you could help me out with that problem with the battery not charging with my Ibook. The computer does not respond to my a/c adapter being plugged in to charge the battery. The battery has not died yet but i am afraid to let it die before trying to fix the problem. if you know any quick checks or overviews i could do on my computer i would love to hear your ideas. Thanks for reading.
Comment 95 by Mate http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment95 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment95 Hi Uli,
Thanks for your informative website. It helped me lots while disassemblying my Ibook. I had problem with my screen. (it was black, and sometimes half black/grey or purple/green/black, but mostly plain black. I bought a used ibook screen and I changed it but it is still black. I can hear hard drive running, keyboard is functional, sound theme on startup, but no video. I am just wondering if you ran into this kind of problem, and what it could be.
Thanks,
Mate
Comment 94 by vau & tschama http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment94 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment94 THX!
we just replaced the hdd, now we have an excellent coffee machine
-works brilliant, fine coffee!!!
I think we made an mistake between the steps 2 to 7!

:0)

Thanks so long!

I fully agree with the comment of Aaron! ;o)
Comment 93 by Paul & Reema http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment93 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment93 Fabulous directions - especially the part about the scotch tape and paper. I've been taking things apart for years and wish I had thought of that a long time ago.

Best,
P&R
Comment 92 by Uli Kusterer http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment92 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment92 Uli Kusterer writes:
@Darlene: Did you have any Application enhancer extensions installed? APE also comes as part of some programs (Logitech uses it as part of their mouse driver, don't ask me why). If you just upgraded to Leopard, then you're running into a known incompatibility between older versions of APE and Leopard.

@Matt: Heh ... I guess it's time you get her a Fischertechnik construction kit so she can build her own vending machine... although 2.5 may be a tad early for that. Maybe just sawing a slot into one Lego brick may be a good alternative?

And sure, I'd love to have a look at the photos. If they fit the page, I'd love to include them.
Comment 91 by Matt http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment91 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment91 Thanks to your guide, I was able to pull 50 cents in change (2x 20c + 1x 10c coin) from the CD-ROM drive of my wife's G4. My 2.5 year old daughter especially likes the money slot on the side of the G4. :-))

Hey I have some photos of the CD-ROM drive being pulled out if you need them.

Cheers!
Matt.
Comment 90 by Darlene http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment90 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment90 I have a G4 ibook and the dreaded blue screen problem. I took it to the apple store and they said it was either a hardware problem or software problem. They think it's a hardware problem. Would replacing a hard drive fix this?

The computer isn't recognizing the wireless card.

I can log on after I hold the shift key down.
Comment 89 by Glenn Quader http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment89 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment89 Glenn Quader writes:
Thank you for this step by step guide. I had to replace the DC plug on my wife's iBook and it worked flawlessly. Bravo!
Comment 88 by Uli Kusterer http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment88 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment88 Uli Kusterer writes:
@Gus: Well, if you've checked the connections (twice?), and that you inserted the wires at the same depth they were at before, and didn't break any wires, have you tried restarting? I had it once that the trackpad kind of went dead, then I turned off and back on, and then it suddenly started working. However, if it's the keyboard, too, that sounds a little odd.
Otherwise, you may have been statically charged and fried the ADB chip, whichever one that is.
Comment 87 by Gus Dalling http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment87 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment87 Great article, I have taken apart my ibook 600 replaced hdd with a larger 40gb one (after testing by installing the os to it in a firewire case. put back together, and now my trackpad and keyboard are non-functional, (before you say he obvious, yes the trackpad and keyboard are plugged into the logic board. any Idea where to start looking for any connections I could have pulled out?) I currently use my ibook with external usb mouse and keyboard, nice but slightly less portable than it once was.
Comment 86 by MAUTESI http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment86 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment86


obrigado
Mautesi

[Congratulations
I liked your page very much because I always wanted to know the heart of the iBook. It helped me a lot.
Thanks,
Mautesi]
Comment 85 by Kevin http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment85 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment85 Excellent article...Thanks for the time spent categorizing it. Made my job so much easier.
Kevin
Comment 84 by Uli Kusterer http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment84 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment84 Uli Kusterer writes:
You'll have to buy an enclosure that is the right size (they usually come in inch-diameter sizes like 5.25, 3.5 or 2.5, though I think CD drives are always 5.25, and then there's the height which is also important). If this is a tray-loading drive like on my iBook G3, you'll probably not have much luck. Not sure about the slot-loading ones, but your chances may be better. Enclosures usually include a power supply and a "controller" chip making it either FireWire (IEEE 1394) or USB. I know that sounds easier than it is, but I guess you'd best find out what enclosures are on offer, and compare their specs to your drive. Can't say more than that.

Hard disk would be easy to re-use. Not so sure about notebook CD drives.
Comment 83 by julie http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment83 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment83 I've disassembled my ibook (as the logic board is fried), and removed the combo drive (cd/dvd). Can I convert it to an external cd/dvd drive? If so, can you tell me how do I go about it?

This is my first time disassembling it, and it was successful (altho many hours)
Comment 82 by ing.conti http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment82 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment82 ing.conti writes:
very useful!
Apple engineers are VERY crazy! At the of the disassembly I have hundreds of screws!!
what a hell!
I look with respect to Macpro Engineers: NO screw, no tool!
Comment 81 by KatHay http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment81 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment81 Wonderful reference site. I work in Educational IT with email OS side. I get into pulling apart a computer when necessary but really get rusty from lack of practice and knowledge...thanks for the info! I know this isn't a discussion forum, but if anyone is out there with some advice...I have an ibook ppc g3 500mhz 67 mhz bus speed 256 L2cache board with 256 m of ram dated 2001 running 10.2.8. I picked up a cheap ibook 2002 700 mhz 100mhz bus 640 mb ram 512 L2 cache g3ppc running 10.2 that the school was going to surplus. However the track pad doesn't seem to work on the 700. Hard drives are the same except for subtleties in the OS and my info is on my old one. Is there enough difference in the 700mhz board that I should try to move it to my other machine or will grabbing the memory and replacing the keyboard be my best bet (oh and yeah, my 3year old molested the keyboard on my 2001 so that I use a usb keyboard). Anyone...anyone?
Comment 80 by Mr C http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment80 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment80 Sam, Probably not a magnet issue. More likely a damaged wire in the wires that run through the hinge to the scree.

My 12" dual USB iBook just developed a backlight problem the same day I brought home a newer iBook G4 (I thought it must have been jealous). The backlight would switch off when the lid was tilted past 90 degrees open. I'd disassembled it before to put a bigger hard drive in it, so taking it apart again was not big drama, though I hadn't taken the screen off and disassembled it the first time. There were 2 loose screws in the screen assembly! Loose as in not in the holes they were supposed to be in, loose in the screen casing, and I had never taken it apart before! Anyway that wasn't the problem.

Over time the wires that run through the hinge get squashed and worn every time you open and close the lid. The Black wire in my iBook was only held together with a shred of the insulation, and snapped completely when handling it. Moving the lid past 90 degrees must have open circuited the circuit, making the light shut off.

I cut the wire off 1 inch from each connector, and spliced in a new wire to fix the problem.

Now thats fixed I have to pull apart the G4 to put a hard drive in it (bought it cheap at auction without one).
Comment 79 by Sam http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment79 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment79 I just replaced the screen and it worked when I had it all disassembled (before putting it back together). Now that it's put together, the screen won't turn on. Can this be related to the magnet issue?

I have the 12" iBook.
Comment 78 by Jon Simpson http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment78 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment78 Many many thanks for this article. Saved me either having to bin my iBook or pay an Apple service centre an outrageous amount of money. And to anyone else who reads this, unless you have a perfect photographic memory, remember to make a map of where all the screws go.
Comment 77 by TonyG http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment77 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment77 Phew, thanks. Swapping HD from friend's G3 with fried mainboard wouldn't have been possible without your advice. I used to think that my Mac repair place was padding their hours, now I see I was being unfair to them. Extra special thanks for the tip on that magnet over the screw head.
Comment 76 by Justin From Saint Louis, USA http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment76 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment76 They really don't make these little bastards easy to get into do they? Actually, without your instructions I would have been lost and for that I thank you! Happy Mac'ing !!
Comment 75 by melanie http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment75 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment75 I wish I had found your tutorial before I followed ifixit's for replacing the hd on an ibook g3 900mghz. You bypass removing the power cable from the logic board. Unfortunately, I pulled the socket off the board despite their warning. I don't feel too bad since I still couldn't pull the connector out of the socket. What is the best way to attach the socket back? Solder or some type of glue?
Comment 74 by Uli Kusterer http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment74 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment74 Uli Kusterer writes:
@Lex: Yeah, the ages-old rule from the 80ies applies: Never eat in front of your computer. No matter whether it's on, off, or disassembled :-) ... okay, I admit I managed to pour soup on my keyboard once, but it's water-proof, so I get away with it.
Comment 73 by Lex http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment73 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment73 Lex writes:
A note: there is no need to remove the aluminium shield at the bottom, at least not with my iBook (G3 800MHz). This saves you from having to peel off some of that nasty tape. It may be necessary to remove the 5 screws that are in the shield, but the two screws under it only seem to fix the motherboard to the magnesium frame. Because there appear to be differences between different revisions of the iBook, it may be possible that on your particular model the screws under the shield go all the way to the upper cover. I'd say: try to take off the upper shell without removing these screws, if it doesn't seem to work, remove them.

I just placed the original HD back in my iBook to sell it (I'm keeping the custom 80GB HD for an external enclosure), but I have taken it apart about 5 times before. Doing it multiple times doesn't help to make it less annoying, because I swear this was the last time I ever disassembled an iBook. I'd rather poke myself with a hot soldering iron than going through that hell again!
Comment 72 by Uli Kusterer http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment72 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment72 Uli Kusterer writes:
@Robert: Yes, the Allen screws are a very odd size, especially the one on the display. I had to go to a friend who's an office equipment repairman and borrow one of his wrenches because mine didn't quite fit. If the screws are pristine, you can usually use metric wrenches anyway, except if they were very firmly screwed. Otherwise, or if they were damaged, you'll definitely need the right wrenches, or you'll just destroy the hex-hole and make it impossible to get them out.
Comment 71 by Robert P http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment71 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment71 A lot of howtos, including this one, say that you need a 2mm hex key to take out the screws on the bottom, but on the ibook I'm trying to fix the screws are larger than 2mm. Unfortunately they are also smaller than 2.5mm, which means that standard metric allen keys won't do the job. It looks like Apple used different screw sizes for different batches of pearl G3 ibooks.

I'm suspect that the hex screws are either 3/32 inches or 7/64 inches. Does anybody else know what exact size the weird size screws are?
Comment 70 by David Nilsson http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment70 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment70 David Nilsson writes:
Great info!

I will try to fix my iBook G4 this week when I've bought the tools etc.
If Icant fix the computer I will try to make something out of the screen and other parts that still is working.
I think "only" the motherboardi broken...
Comment 69 by robert http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment69 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment69 thank you very much, i had to replace my upper case latch on my ibook. with you steps it was very easy. now if i ever need to do other work i will go with your instructions.

an authorized apple repair place wanted 80 dollars for the part and 75 dollars an hour for labor (min 1.5-2 hrs)to install this. with your steps i did it in less than 2 hrs and bought the latch on e-bay for less than 20 with shipping.

thanks a bunch and <bows> to the moose god.

have a great day.

nightscape
Comment 68 by bla bla http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment68 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment68 yea, if you need to any kind of fixing job, or replacement, or upgrade, go to: ifixit.com, and click on guides. it tells you everything! and the recommended tools! very handy
Comment 67 by LninYo http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment67 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment67 good work! i used your instructions to fix my g3 ibook. I used another site (faqintosh ) to fix my g4 newer ibook and guess what, the power connector on those things is awefully fragile. I pulled on it and the whole assembly came up!!!!!

BE VERY VERY VERY C.A.R.E.F.U.L !!!!!


Now, does anyone know how I can close this thing back up? i was able to boot it by shorting the two points which I guessed were the contact points.. if I just solder those two points there permanently, would that just boot the machine every time I hooked up the power cord? the battery and the charging don't seem to be affected by this.
Comment 66 by Megan http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment66 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment66 Excellant work, Uli! This was very informative. I have everything assembled except the keyboard (due to a move I cannot find it) and it wont power up. The hard-drive spins up and down real quick but that's it. I thought I read somewhere that the iBook wont turn on if the keyboard isn't inserted. I'm hoping that is the case, for I am one step away from resurrecting this baby from the dead. Anyway, thank you so much for this.
Comment 65 by vanessa de souza lage http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment65 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment65 thanks a lot! you are our savior!
Comment 64 by mookid http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment64 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment64 Thankyou. I now have a working iBook too!
Comment 63 by Levente http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment63 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment63 Thanks a bunch! I used your awesome step-by-step instructions to diagnose the problems on my friend's iBook. Thank you for all the meticulous detail you put into this article.
Comment 62 by Justin Scott http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment62 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment62 Justin Scott writes:
I brought the disassembly to a new level. I replaced the ram, the wifi, the hard drive, the keyboard, the cd-rom and finally, they monitor! Check it out!

http://web.mac.com/justex07/iWeb/iBook%20Dissection/Dissecting%20the%20iBook.html

Took this site to give me the confidence, thanks!
Comment 61 by Jonathan http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment61 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment61 Instead of Shish Kabob stick, I used old credit cards (or a plastic discount cards). I had 6 of them and inserted in all sides. Lot easier and won't damage or scratch the surface.
Comment 60 by Uli Kusterer http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment60 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment60 Uli Kusterer writes:
@Alex: I think you're mixing up the iBook G4 or the MacBook with the G3. To make the iBook G3 go to sleep, I can simply pull out the hook at the top of the screen (the one that keeps it closed). So, for this old model it's easy to prove that no magnets are involved, or at least not this magnet.
Comment 59 by Alex http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment59 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment59 -Tears welling up in eyes, then hugs the writer- I'm Apple Certified in laptop hardware, and I must say this is one of the BEST tutorials that I have seen for this... Other than the Apple ones. Only one thing I caught though, that little magnet that you say is to hold the keyboard down is actually the Sleep when closed, that magnet is the reason the computer is triggered to go to sleep, but other than that GOOD JOB. I would recommend you to get Certified definately.
Comment 58 by Wes http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment58 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment58 THANK YOU!

I went through this nightmare when my hard drive died and these instructions got me through it. These instructions worked just as well for a slot-load iBook G4 (800 mhz).

I should point out the pitfall I found- there is another, larger magnet glued to the underside of the top (acrylic), just below the >/End key. Mine came unglued and when I found it, I couldn't figure out where it went anymore. That magnet is used so the machine knows when the lid is closed. To prove this to yourself, slide a magnet down the right edge of the display, and the machine will go to sleep.

Once I realized what the magnet was for and what part of the screen had the magic sensor, I found a spot on the acrylic where the magnet was supposed to go, and all is good since then.

I used a Seagate 7200 RPM 100 Gb hard drive and haven't found the noise to be excessive like some warned. It's no louder than the original Toshiba 30Gb. It is a little warmer, but still OK. I don't see much difference in battery life, either, but I don't use the battery much.
Comment 57 by kajgod http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment57 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment57 I got an old broken Ibook just like the one you worked on, and it works fine if the battery is charged on another computer, but it will not work if you plug it in the wall.
What I want to do (since I don't care for it's mobility) is somehow bypass the battery and connect the power from the adapter directly where battery used to be... Is that possible? If not, any other way to do the trick? The service wants to charge me 200 euro, but I'd prefer to play around with it myself, just for the fun of it...
Comment 56 by Uli Kusterer http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment56 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment56 Uli Kusterer writes:
@ron: Why would you need power to eject the battery? Just use a coin to turn the "lock screw" by 90 degrees, and the battery should pretty much just jump out at you. If my description isn't clear, refer to the handbook. It has drawings that show how to eject the battery.
Comment 55 by Per-Kristian http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment55 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment55 Thank you for your help. I have been spending the last to hours replacing the harddisk in my iBook G3, and it works perfect! Because of you!!!
Comment 54 by ron http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment54 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment54 ron writes:
i like what you have showed me so far,but is there any way that i can eject
the battery without taking my apple laptop apart.it has no power at all
Comment 53 by Mike http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment53 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment53 I found that I can change the logic board from the old 500 to anything up to the 900, you ( I ) need to change the rib frame, the modem, the heat sink and fan. That's it. Now I just need to save up and get the parts. Shouldnt cost more than $200 to change to a 600/700 and not more than $350 to go 800/900. (I could just get another used book, but wheres the fun in that).
Comment 52 by Uli Kusterer http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment52 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment52 Uli Kusterer writes:
@Charles: An easier solution to that would probably be to hook up your two Macs with an Ethernet cable or using target disk mode and use CarbonCopyCloner or so to copy over your files. I wouldn't take apart a pefectly working iBook just to transfer a few files.
Comment 51 by Charles Wolfman http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment51 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment51 Great job on this article Uli, very informative and helpful.
This will be very helpful when I get my iBook, I need to switch out the drives cause my mom wants my old Powerbook G3, but I want to keep my stuff.

Great work!!
Comment 50 by Diamond http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment50 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment50 You are a life saver! Perfect instructions!A big thumbs down to Apple for putting the first part to fail in notebooks in the most difficult place to get to!
Comment 49 by Uli Kusterer http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment49 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment49 Uli Kusterer writes:
@Joe: I'm not 100% sure. Check out Apple System Profiler to find out what kind of hard disk is in your Mac, and try to get one like that. I think 4400 rpm seems a little slow though... make sure your access times and rotations-per-minute aren't lower as what you have built in. The hard disk is one of the main bottlenecks if you don't have oodles of RAM installed. BTW, a nice place to find out about the specs of your Mac is http://www.apple-history.com
Comment 48 by Joe http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment48 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment48 17th Nov 2006. Hi Uli, SUPERB pictured article - given me the nudge to replace my HD! Is there a particular part number for a hard drive that will fit, for example, would this fit
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=300049613370&fromMakeTrack=true
Will let you know how it goes if we manage a marriage!
Comment 47 by Uli Kusterer http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment47 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment47 Uli Kusterer writes:
@Mike: I don't know. You'll have to try it and report your results here, I guess.
Comment 46 by Mike http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment46 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment46 That is an AWESOME break down, I am going to be getting a used iBook 500 in good condition for $150.00, I was just wondering if I can get my hands on 600 or 700 logic board, will it just drop in place of the 500 board? Thanks for the great pics. Can you send me an email to let me know. THX
Comment 45 by 60 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment45 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment45 thank you so much for being with me when replacing my good old g3-ibooks harddisk, wonderful description, helped me a lot
yours, 60
Comment 44 by Uli Kusterer http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment44 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment44 Uli Kusterer writes:
The desktop is just a folder in your home folder. All your files should be in there. If your username is "ahunter", then the files will probably be in /Users/ahunter/Desktop/.
Comment 43 by Alex in the UK http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment43 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment43 Uli - man - you are a legend.....

i managed to get the HD out and put in another shell so i can recover LOTS of lost stuff.... quick question though.... if a file was stored on the desktop - is there any way to recover that?? I had a load of college work in a file on the desktop... is this gone?

i have been taught a lesson about backing files up this time!!

thanks again
Comment 42 by Uli Kusterer http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment42 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment42 Uli Kusterer writes:
George, worst comes to worst, you could carefully try using contact glue or so to and a shishkebab stick to glue the plug tip onto something that you can hold and use to pull it out... though of course you can make things worse by glueing the broken plug *into* the outlet if you get it wrong :-S
Comment 41 by Uli Kusterer http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment41 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment41 Uli Kusterer writes:
George,

I can't really help you with that, as I don't own such an iBook model. If its power plug is anything like mine, I don't think you can just replace it, as it looks suspiciously like a proprietary plug.

If you're adventurous you could try to get a same size plug that looks like the centerpiece and somehow replace the broken centerpiece with that (no idea whether that's even possible) or lop off the plug from the power supply and replace both the plug and the outlet for it with another plug...

But really, I wouldn't know how to do that, and I doubt the outlet is that easy to remove... You'd definitely need to be handy with a soldering iron. You might be able to extract the plug with a pair of pliers and buy a new power supply. That would at least be cheaper than having some Apple guy remove the whole outlet from the main board (because the latter would require opening the Mac). Might even be possible to get Apple to put a new plug on the power supply, but I have no idea whether that'd be cheaper than buying a new one. ... repairs and power supplies both aren't cheap.

BTW -- I removed your e-mail address that you posted into the message. *never* put plainly readable e-mail addresses on the web site -- spammers send their junk to everything that contains an "@"-sign that they can find on the web.
Comment 40 by George Kennedy http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment40 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment40 Thank you, Uli, You are a friend to every willing but inept Mac lover - it's a masterful guide and obviously a labor of love.

My G3 iBook 14" (female) AC slot has the (male) AC cord's 'projecting tip' stuck inside the hole. (I didn't ask my grandson how he managed to break it off)). Is there any way to get it out, or bypass the slot with AC, or replace the switch? Old or not, it's just too good a machine to discard. The way it is now, I can't even charge the battery. Thanks again for being a MAC hero.
Comment 39 by Uli Kusterer http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment39 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment39 Uli Kusterer writes:
@Thomas: I don't think the G4s even have a tray... aren't they all slot-loading? So there's nothing to unlock there, as far as I know. But as I only have a pearl-white, I can't help you :-( If you're simply looking to get a CD out of the drive, you could try starting up and holding down the mouse button a couple minutes, that will usually eject a CD.
Comment 38 by Thomas regny http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment38 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment38 HELP ! I have a ibook G4 933mhz and I can't unlock the CD tray as shown. Is there an other way?
Comment 37 by Uli Kusterer http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment37 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment37 Uli Kusterer writes:
@brad: I don't know where the antenna goes through the hinge, but I think it's basically one of the long wires that go around the display in the top shell. If you make sure you don't mix it up with the microphone's wire, I think it should be easy to spot. Hope that helps you find a fix. If you do, be sure to let me know.
Comment 36 by brad http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment36 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment36 Hi.



Suggestions?
Comment 35 by ferretmom http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment35 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment35 Wow! Great explanations and photos! Enough to convince me to put my keyboard back on, bake some goodies and do some major kissing up to a friend!!!
You just saved me hours of frustration and severe damage to my old iBook! Thanks :)
Comment 34 by Dave Chugg http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment34 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment34 Nice description.

Good idea if possible to actually test out the new HD before changing. Get a 2.5 inch firewire enclosure, connect your new drive and use the free and excellent Carbon Copy Cloner program to clone your old HD to the new one. Then set the Firewire connected disk as your new start up disk. Run it like that for a couple of weeks to make sure your new HD is good and reliable. Then do the swap over.....

All this assumes of course your old HD was still working okay and you just wanted to go bigger.
Comment 33 by Mark http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment33 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment33 Greetings,

I have an iBook that will not power up. I took it apart and found that there is a small battery soldered to the main board, looks like it has leaked, I was wondering if there is a listing of replacement of this battery? What to look for if the battey leaks on the main board? It looks like it must of been running hot because the plastic covering has dried out.

Thanks in advance,

Mark
Comment 32 by Uli Kusterer http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment32 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment32 Uli Kusterer writes:
@dustin: AirPort is mentioned and there's even a photo. Taking out the RAM really isn't necessary, at least for the Pearl White iBook about which this article is. Obviously, YMMV for any other models.

@Vini: Getting a used iBook? If you ordered a MacBook or so, keep in mind that that's a completely different machine that will look very different from this one. Also remember that this voids your warranty. If you still have warranty, I recommend just sending it to Apple for repairs and waiting to find out how the inside looks.

@Lee: The hook for the closing mechanism is in the lid (i.e. where the screen is). I'm not describing that here, but it's fairly easy to open if you have an allen wrench that exactly fits. If it even slightly doesn't fit, you'll slip and damage the screws, which can make it impossible to open, so be careful there. For the latch it hooks into, you need to go far enough to take off the bottom cover, then it should be visible as a small spring at the top, next to the sleep light.

@Dom: Haven't heard about that one. I've heard about odd stuff on the display if the logic board was a goner, and a white display means all pixels are off (i.e. cleared), so my guess would be it could also be a broken cable in the hinge, but you'd rather ask someone who has hardware knowledge about that.
Comment 31 by Dom http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment31 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment31 Uli
Fantastic job. looking forward to changing hard drive instead of worrying about it. One question, my mates g3 ibook 500 is getting a white screen every now and then, after you close the the lid and re-open it, it seems to right itself. Do you know if this is a common problem?
Cheers
Comment 30 by Lee http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment30 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment30 Good instructions! Can you tell me how far I have to go with the procedure to get at the closing mechanism, probably on both case and cover. Mine doesn't stay closed, and I'd like to try to fix it.
Comment 29 by Vini from UK http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment29 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment29 thanks, i havent got my ibook yet im only 14 but im very very good with computers, well pc's anyway and i have never taken apart a mac but soon to be ! :)
Comment 28 by dustin http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment28 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment28 dustin writes:
Just remeber when you do this, take out all of your ram and airport cards. Im not sure if it was mentioned in the article or not, but I took the entire thing apart twice to figure that one out. Good luck!
Comment 27 by trina http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment27 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment27 HI,

I have an ibook g4, but my latch is broken there for my lid doesn't shut completely. I was wondering how can I fix that problem. Does it mean that I have to replace the top lid, or the bottom cover where the mouse is. When I close it I can see the metal latch on top point down, but it wont connect to the bottom laptop. Thank you for reading this letter.


Sincerely,


Trina
Comment 26 by Shawn Jesty http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment26 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment26 Thanks much!!

Extremely useful.
Comment 25 by abobolos http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment25 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment25 BIG THNX for this! Helped me out alot.


Greetings from stockholm
Comment 24 by Scott Huffines http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment24 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment24 Scott Huffines writes:
Thanks for the thorough directions... I inherited an old broken Ibook, all it needed was a $20 power connector from Ebay and I'm in biz!
Comment 23 by roel & jan http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment23 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment23 thanx man!
you guided us very well through the whole procedure, great work! And also very much thanx to your sister for the photos and of course the raindeer for its brilliant performance!

Greetings from Amsterdam
Comment 22 by leo http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment22 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment22 Uli - Many thanks for doing this excellent documentation for dissecting the ibook! In the process of taking apart my brother's ibook to harvest the hard disk and all the data as the logic board's konked and it appears that i won't be able to get the logic board fixed/replaced anymore! Your generous sharing of the dissection process is going to save me a ton of time! Thanks again on behalf of all us do-it-yourselfers..!!!
Comment 21 by bz http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment21 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment21 Uli, you're genius! Many thanks for your step-by-step and for making it idiot-proof. I'm certainly no geek but thanks to you I was able to install a new drive and get my iBook back in the saddle! You rock, Dood.
Comment 20 by Uli Kusterer http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment20 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment20 Make sure you set the jumpers correctly on the disk. IIRC you need it as "master". Some shops sell hard disks jumpered as "slave". I'm not sure, but the CD drive may be the slave to the hard disk, so if you jumper both as slaves, that would explain why you see neither. Either that, or you pulled out a cable (maybe by accident) and didn't put it back in again before assembly. I'm just assuming you bought the correct kind of hard disk. Some computers have a size limit and can't make use of some of the larger disks (above 120 GB, I think), so I hope you didn't fall for that.
Comment 19 by T.B.Hansen http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment19 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment19 T.B.Hansen writes:
I followed the instructions, shut the case, and - neither the new disk or the CD drive works. I can start the iBook is from an external disk, but neither DiskUtility nor DiskWarrior can see the HD or CD drive.
Comment 18 by acsmooth http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment18 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment18 Thanks for the nice explaination. It took me 2 hours to get it done.
Comment 17 by Reaper The Grim http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment17 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment17 Reaper The Grim writes:
Wow this is amazing, I just bought a DVD/CDRW for my iBook and was trying to find a way to install it in the ibook, This is the closest I was able to find to helping me install my Drive
Comment 16 by Glenn Grafton http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment16 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment16 Excellent step by step guide. I've replaced the drive in a 12" G4 PowerBook which was also a bear. I've also found the step by step instructions here: http://www.ifixit.com/Guide/50.13.0.html
to be a big help. Take a look there too if you're going to give this a try.
Comment 15 by Henk-Jan http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment15 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment15 Henk-Jan writes:
nicely done, missing the odd picture here and there, now sort of stuck trying to get the top lid off, unsure if I have all the proper screws out :(
Comment 14 by derzornigemarkus http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment14 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment14 derzornigemarkus writes:
this is the perfect guide! replaced my harddisk in under two hours :o)
only problem left: the harddisk wasn't the only troublemaker :o(

got lots of picture http://derzornigemarkus.de/insidemac.htm
ah and i used chopsticks. those in combination with an swiss army knive work very fine :o)
thank you very much uli

check my blog www.derzornigemarkus.de
Comment 13 by MidnightToker http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment13 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment13 MidnightToker writes:
dude, you're a life saver. -well, you made me think.

HDD just died in a friends G3 Dual USB iBook. Not a problem I said, and bought him a new disk from Ebuyer.

I followed the apple hardware guide for taking apart the laptop (one of the bonus's of formerlly working for an Apple Repair Center, tonnes of documentation) and realised that actually, it was a bit of a problem.

The takeapart took a couple of hours, its fiddley, time consuming and scary, but it happened, and the iBook has sat in my desk draw for a week or so, untill the hard drive arrived (just now, 40GB Toshiba), so I plugged it in with the keyboard resting on top and booted back into DiskWarrior to check the new drive was seen and happy.

No hard disk showing. Booted into Drve Genious instead. Still no disk showing. I head outside, have a coffee and try and stop panicking that the new drive isn't Mac Compatible, and my friends iBook is scattered in pieces accross the desk.
Long panic short, it turns out that Disk Utility see's it fine even if DiskWarrior and Drive Genious dont. Panick over, and time to try putting hte thing back together -except I'm going to follow your instructions rather than the apple ones.

-Nicely documented, generally nice website ;) -thanks.
Comment 12 by Obi http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment12 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment12 right now i did the same job that jomo did withj the DC-IN board. it flawlessly worked. thanks
Comment 11 by Yon http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment11 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment11 Hey Great how-to. Thank you. I am planning on getting a bad ibook, replacing the logicboard and putting ubuntu on it. Your how-to is clearer/simplier than the official apple manual. Thanks again and thanks to asian cajun for the pbfixit url.
Comment 10 by John http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment10 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment10 Holy Mackerel that was a pain! There was a zillion screws to keep track of, plus a number of them were different sizes, plus cracking that shell apart was very difficult.

With the Dell laptops, there's just one screw and you pull the drive from the side of the unit. The hard disk is usually the first thing to go on a laptop. Obviously, Apple makes plenty of money on folks bringing in their computers to have their hard disks replaced (rather than fixing them at home, or having a handy friend do it).

BTW, placement of that screw beneath the small magnet was diabolical.
Comment 9 by jomo http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment9 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment9 jomo writes:
This would have been pretty scary all by myself, but with the moose there I felt quite safe. So thanks! I used this writeup to do a switchout of a DC-in board, actually, but the disassembly was all the same right up to the end.
Comment 8 by rentzsch http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment8 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment8 rentzsch writes:
Rocking writeup, Uli. It came in very handy tonight :-)
Comment 7 by Jim http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment7 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment7 Very helpful! With your nice instructions, I have just finished uprading my ibook G3 with a new hard drive, slot loading DVR drive, and fixe the reed switch cord. I now have an ibook that should last me another three years. Thanks!
Comment 6 by asian cajun http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment6 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment6 Great job! Nice to have pics of a real system to see everything. BTW, the "yellow-insulated thingy" is actually the video chip, and it's the bugger that has been responsible for so many logic board failures in the the dual USB iBooks (12" and 14" models), and in the even newer models as well. The G3 processor is actually on the top of the logic board and underneath the metal heat sink that is located where the airport card sits. To see how to do more repairs, such as logic board replacements or display replacements, I suggest checking out www.pbfixit.com.
Comment 5 by Shish Kebab with a Vengeance http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment5 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment5 Excellent Article. One for the Community :)
Comment 4 by Ed Kemp http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment4 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment4 Many thanks for the informative article. The pics are a great help along with your easy to follow narrative.
I pitied my old ibook sitting on the desk becoming a coffee stand whilst I used the wonderful Asus.
Took it apart and fixed power, sstart up and screen problems.
I like the compact, on the knee, comfortable keyboard and decent battery power of the ibook.
It is like having an old friend back.
Cheers,
Ed
Comment 3 by tom http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment3 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment3 tom writes:
hey, thanks so much for documenting this. i just replaced a friend's hard drive and it went without a hitch.
Comment 2 by Uli Kusterer http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment2 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment2 Uli Kusterer writes:
*kicks Aaron* ;-)
Comment 1 by Aaron Ballman http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment1 http://zathras.de/angelweb/blog-ibook-disassembly.htm#comment1 Aaron Ballman writes:
Holy moly! Great article -- very informative.

Wonderful reminder of why I don't buy Apple products or laptops unless I have to. ;-)